Views: 3 Author: Site Editor Publish Time: 2022-05-24 Origin: Site
The bottle is transported through the air duct into the bottle dispensing wheel of the bottle punching machine. The bottle bottle clamp is installed on the turntable of the bottle punching machine. The bottle clamp holds the bottle mouth and turns 180° along the slideway to make the bottle mouth downward. Sterile water is sprayed from a nozzle on the bottle holder in a specific area of the bottle flushing machine to wash the inside of the bottle.
After washing and draining, the bottle is held by the bottle clamp and then flipped 180° along the slideway to make the bottle mouth upward. The rinsed bottle is fed into the filling machine through the transition dial wheel <4>.
Into the bottle filling machine by the unit pressure in the bottle, bottle under the effect of lifting device, bottle to bottle up to a certain height to resist filling valve seal bottle, open open valve installation, start filling, material is under pressure by filling in the valve of special structure is divided into the circular arc of the fan, and along the wall into the bottle, bottle By filling in the valve of air inside the bottle back into the trachea into and implemented in cylinder filling, as the filling level rise gradually to the bottle, when the liquid level inside the bottle reaches a certain height and block back to back to the port of the trachea, filling, closing valve device, close the filling valve and exhaust CAM top valve, all pressure to be lifted the bottle, complete filling. The filled bottle will drop under the action of pulling down the CAM, and when it drops to the lowest level, the filling and sealing dial wheel will take out the completed bottle from the filling machine and send it to the capping machine. Capping head in capping machine to keep revolution and rotation, under the action of the CAM to achieve the capping, capping, removing the capping action, complete the whole capping process.
The finished bottle is transferred from the capping machine to the bottle conveying chain <9> through the bottle dispensing dial wheel, and the conveying chain is transferred to a three-in-one machine.
