Today we finished 2 pcs of 40hq container for plastic bottle water production line .The line start from preform and caps injection line ,bottle blowing machine ,and water filling labeling line .production line speed of 6000bph . and caps use sport caps for high grade water quality . Welcome friends

1.1 At the end of filling, spray the whole machine with water, remove all stolen goods, and dry the parts or blow dry with compressed air.When cleaning, check the machine roughly for signs of wear and cracks.1.2 The filling valve and exhaust pipe must be checked and readjust.necessary.1.4 Rinse and

Air transport introduction The air delivery path is supported on the ground by a tripod, and the fan is installed in the air delivery path. An air filter is installed in the intake of each fan to prevent dust from being blown into the bottle. The bottle is stuck by the bottle hanging board in the ai

The bottles are transferred from the delivery chain to the 3-in-1 filling machine. The bottle entering the filling machine is kept by the bottle neck support plate, and the filling valve is lowered and raised by the mechanical lifting mechanism under the action of the CAM. Normal pressure filling is